Before you decide what to buy or how much money to raise, find out how much cash you need, when you need it and what that cash will pay for. You might have enough money to cover the costs you listed across a whole year and still run short in the month a large payment is due. This chapter shows you how to build a launch budget that reveals that gap early enough to change the plan.
You’ll finish with a use-of-funds schedule, which is a dated list of what you expect to spend, and a funding gap check, which shows when the forecast first drops below the level of cash you need and the size of its lowest point. You can use both in Stage 7 · Financial Planning in Startup Builder. Bring the one-page viability note from Chapter 1 and choose the version of the idea you want to plan for. If the idea has changed since you wrote it down, update the offer, the intended customer and the expected launch date.
Figure 1. From the first cost estimate to a funding decision.
A worked example: reading a saved startup-cost estimate
1. Decide what you’re getting ready to launch
Start with what the first version needs to do. Write what you expect to sell, the customers you plan to serve, and how they will receive it. Give the first commitment a date. It could be the day you need to order supplies, submit an application, pay a deposit or make equipment available. A cost list is easier to check when it describes a particular version of your plan.
Use these
Launch Scope
three questions before adding a price to each item.
Does it need to be ready before trading? Include anything essential to deliver the offer or meet a condition before you start. Find out which commitments you can make later.
Do you already have access to it? If you can use something you own or have permission to use, record that and check whether it will be available when needed. Add only the new payments you expect to make, such as maintenance, insurance or a replacement.
What would bring the cost forward? A supplier’s lead time, a notice period or a need to reserve capacity can cause money to leave before the item arrives. Write down the date you need to make the decision and the date you expect to pay.
Think through what customers will do to buy from you and what you’ll do to deliver. As you go, check the preparation costs, the cost of completing a sale and the costs due while you wait to get paid. Keep optional items in your list with an expected decision date. You can decide whether to buy them when you know how much cash is available. Start Up Loans suggests breaking early spending down into areas such as equipment, premises, people and supplies, then researching the costs that apply to your plan (Start Up Loans, no date b).
2. Separate one-off payments from costs that continue
A startup cost is something you expect to incur to get the business ready or to start operating. A cash outflow is money that leaves the business. These ideas overlap in a launch budget. You may purchase equipment in one payment and use it for several years. In a cash forecast you show what leaves the account, and when. In a profit and loss forecast you’ll handle costs by the period they relate to. For now, follow the payment.
Figure 2. Group payments by what causes them and when they happen.
One-off payments and costs that continue
Use four questions to organise your list.
What do you pay once to get ready? Initial equipment, installation, professional work on a particular launch task and a first set of samples may each have a single cost. Check for delivery, setup and training when asking for a quote.
What stays due even if sales are slow? An overhead is a cost of keeping the business running. You can have many overheads before the first sale. Record the first payment and the billing frequency. A quoted annual cost could be paid up front or split into instalments. Put the schedule you actually expect into the forecast.
What changes each time you make a sale? A per-sale cost is caused by making or delivering a sale. Supplies, fulfilment charges or transaction fees can fall into this group. Check whether the cost must be paid before receiving the sales money and whether you need to buy in batches. A batch purchase can absorb cash earlier than the related sales.
What cash will be held until later? A refundable deposit can tie up money until the person holding it releases it. Record the payment when it leaves. Record a potential return in a later period, based on the timing and conditions you have evidence for. If a deposit is an instalment toward the same purchase, show the remaining balance when due and check that the instalments add up to the full agreed payment.
The same expense can have more than one description. A software subscription, for instance, can start before launch and continue every year. Record each payment once. Use a label to explain what it’s for and another to record whether it repeats. This lets you look at which cash leaves before launch and which commitments continue afterward.
Your prop
Continuing Costs
osed activity can also affect the cost list. If you may need a licence or other permission, look up which authority handles it and what it requires for your activity and location. Estimate the time as well as the amount. Add confirmed charges and related preparation costs where they are due. Include an action to verify any amount or timing that’s still open (GOV.UK, no date). Check the GOV.UK licence finder
Check the money you’ll need to live on
If you expect to depend on the business for personal income, give your household a separate budget. Add up the amounts your household needs to pay and the income you expect it to receive. The difference helps you estimate how much you can put into the business and when you may need it to support you. Bring any money you plan to put into or take from the business into the business cash forecast as a separate line with a date. Start Up Loans’ planning guide recommends keeping a personal survival budget alongside the business forecast (Start Up Loans, no date a).
3. Put a source and a payment date next to each amount
A price on a website can help you estimate. A written quote can tell you more about what the supplier will provide and how long the price will hold. A contract or invoice may specify what’s already due. The practical question is which source supports the amount you’re using, and which document supports the date. Check both before relying on either.
Figure 3. Turn a supplier quote into dated payments.
For each line, write a short description, amount, expected date, source and current status. Save the quote or link and the date you checked it. If your figure is an estimate, record the range you think is plausible and the day you’ll try to get a better answer. If a payment depends on a decision, name the decision and who owns it. A simple label such as estimated, quoted or committed makes it easier to review the list.
Evidence Worksheet
Read any payment terms before moving an amount into your forecast. Check for an up-front instalment, balance on delivery, staged progress payments, minimum orders, renewal dates and separate fees where these apply. If you’ll pay two instalments, enter both on their dates. If one instalment is still unknown, give it its own note. When you have several quotes, compare them on the same basis, including anything you’ll actually have to pay to use the purchase.
Use the expected amount that will leave the account for your cash plan, including charges you’ll pay. If you expect a later refund, recovery or reimbursement, record that separately with its own timing and evidence. Keeping the two dates visible helps you see the period when you’ll need to cover the payment. The British Business Bank’s forecasting guide makes the same distinction for customer money. Put it in the period you expect it to clear, which can differ from the invoice date (British Business Bank, no date).
4. Build one 36-month view
Your plan starts in the month you begin planning. That can be before your first sale. Build a rolling 36-month forecast, so each time you review it you have a full three years ahead. Keep a dated copy and replace past estimates with actual payments and receipts as they happen. Carry the current cash balance into the revised forecast.
Three Year View
Year 1. Work month by month. Record the opening balance, customer receipts, new funding, supplier and staff payments, instalments and the closing balance. When you need to know if bills can be paid on time, check the dates inside the month too. A positive balance at month end can hide a week when the account would run short. Pay particular attention around launch, as several costs may fall due before customers pay.
Years 2 and 3. Use quarterly summaries and annual totals. A quarter is three months. Connect the figures to strategic milestones, such as adding another delivery route or deciding whether sales can support an extra hire. Record the month or specific due date for large payments, renewals, repayments or incoming funds when timing affects the decision. Add monthly detail within a later quarter if a shortfall may be hidden in its total.
Add each year’s receipts to get total money received and separately add its payments to get total money paid. Keep the year-end balance as the closing balance of the final period of that year. Keep the lowest balance visible too, with the date on which it occurs. Those two balances answer different questions. The year-end figure tells you where the year finishes. The low point tells you where to check whether you can pay the bills. Update the forecast as information becomes available, as estimates farther into the future depend on more assumptions (British Business Bank, no date).
Give each period a job
In the first few months, use the forecast to decide whether you can commit to a payment today. For later quarters, use it to check whether milestones still make sense. If you plan a major purchase in Year 2, record what would justify it and when you’ll decide. Check that the forecast actually includes the payment and any continuing costs it creates. A Year 3 growth goal is more useful when the related spending, cash and capacity assumptions are visible.
At each update, compare projected and actual receipts before moving on. When an expected payment hasn’t arrived, move its date and review the reason. When a cost has gone up, update any other periods that rely on the same quote or contract. Date your revisions so you can explain whether the gap changed because the timing, price or scope of the plan changed (Business Wales, 2025).
5. Check when the money will be available
Start with the cash the business can use on the first date of your plan. Add customer receipts in the periods when you expect them to arrive. Keep the evidence or assumption for each important receipt, such as when you expect to sell, how long customers have to pay and how settlements reach your account. Be clear about where a receipt is a forecast and where a customer has already paid.
Funding means money you expect from an outside or owner source to help cover the business’s cash needs. Record what’s already in the opening balance. Include any owner contribution or loan drawdown you’ve already received in opening cash if it’s available at the start. Enter additional funding on the dates you expect to receive it. Count each amount once. Put later repayments and associated payments into the cash schedule too. A lender may want to see the assumptions behind the forecast and when the business expects to receive and make payments (Department for Business and Trade, no date).
Figure 5. Give each expected funding payment a status.
Confirmed. Record the amount and expected date and keep the evidence that supports both. Check when you can actually draw down or use the money.
Conditional. Identify what has to happen and when you will know if it has. Put the amount in a separate scenario so the reader can see when the plan depends on it.
Being explored. Record the source and the next action. Keep the amount outside the view of funds you can currently rely on.
Funding Availability
Your first version can use expected customer receipts and only funding that you have evidence to treat as confirmed. Confirmed funding remains a dated forecast until it clears. When a payment is large enough to change the decision, test the effect of receiving it late. Use the same discipline for customer receipts, even when you have a signed order and an agreed due date. The risks are different. A customer might pay after the due date, and money described in a funding offer may still depend on a condition. In both cases the business needs cash at the point it has to pay.
6. Work out the closing cash and the funding gap
Opening cash is what the business expects to have available at the start of a period. Closing cash is what is left after adding receipts and funding and taking off payments in that period. The closing balance becomes the next period’s opening balance. If the result goes below zero before new funding or a change to the plan, the negative figure shows a shortage you need to address.
Figure 6. Calculate the cash balance for each period.
Decide whether you need a cash buffer, the minimum amount you aim to hold so there is room for events such as a delayed receipt or an urgent extra payment. Use the payment terms and near-term commitments to decide what that amount should cover. Write the target and why you chose it. Treat the buffer as a target balance. The costs you expect to pay have their own lines in the forecast.
At each review point, calculate the funding gap as the extra cash needed to reach your chosen buffer. If the projected balance is at or above the buffer, the gap for that point is zero. If it falls below, subtract the closing balance from the target. Check the first gap date and the largest gap shown. The first date tells you when you need to act. The largest amount shows the greatest shortfall in that version of the plan. If the balance goes below zero, you can also report the cash needed simply to return to zero.
Figure 7. Find the shortfall against your chosen cash target.
Funding Gap
Choose a cash target you can explain
Review the bills you would still have to pay if a customer paid late. Look at how much notice you’d have before the balance fell and how quickly you could reduce or move a payment. A useful target reflects those facts. Write down which events it is meant to cover and review it when payment terms or commitments change. If you add an expected expense to the forecast, count it as a payment when due. The same amount can inform your target when you are considering a separate risk. Check that you understand why it appears in each place.
The gap is measured after the launch payments and available funding are included in your forecast. Calculate the largest shortfall against the target from those balances. That result already reflects any startup costs you entered. If you want to test more expensive setup work, update the relevant payments and rerun the calculation.
A short calculation with numbers
Start with £2,500 and use a £500 cash target. The numbers below are only to show how the calculation works. Each period opens with the previous closing balance. The £1,200 in Month 3 is treated as confirmed for this calculation and stays in Month 3.
Figure 8. Check the lowest balance before the later funding arrives.
Month 1 closes with £800. That’s £2,500 minus £1,700 paid. It stays above the £500 target.
Month 2 closes at −£400. That’s £800 plus £600 received minus £1,800 paid. The shortage is £400 to reach zero and £900 to reach the £500 buffer.
Month 3 closes with £1,000 in this unrevised projection. The balance starts at −£400, adds £1,000 of customer receipts and £1,200 of funding, and subtracts £800 paid. The earlier negative balance still means the Month 2 plan needs a change before those bills fall due.
With these monthly figures, Month 2 is both the first gap shown and the largest one. Payment dates inside the month could reveal an earlier or larger shortfall. Before taking on a commitment, check those dates too. Keep the original calculation so you can see whether the plan improves when you change an amount or a due date.
Run a second calculation with a late receipt
Move the £600 customer receipt from Month 2 to Month 3 and keep the other dates and amounts the same. Month 2 now closes at −£1,000, so the gap to the £500 target rises to £1,500. The original and delayed calculations both close Month 3 at £1,000 because the same cash eventually arrives by then. Show how much earlier the cash is needed before agreeing to the payments that cause the gap.
Figure 9. A late receipt increases the funding gap even when the later balance recovers.
Startup Builder - Cash Flow Overview
7. Decide which change closes the gap
Now you know the date on which the cash is needed and how much you’re short under the assumptions used. Put your next decision against that date. Decide what you’ll change before spending, who needs to agree and when you’ll check again.
Figure 10. Decide what you can change and rerun the forecast.
Change the timing. Check whether the supplier will agree to stages or a later payment. Write down the agreed new date and any effect on delivery or cost. If the same change pushes customer receipts later, move those too.
Change the scope. Delay work that can wait, or reduce the first version of the offer to the parts you can fund and deliver. Check which revenue assumptions or legal requirements change with it.
Find more funds. Identify the date and amount you need and what has to happen to make money available then. Add repayments or other related payments to the plan where applicable.
Risk Responses
After each change, rerun the forecast through the next 36 months. Look for a new low point after the change as well as the gap it was meant to address. Delaying a payment can move the cash pressure to a later month. Taking funding may fix the first shortfall and introduce future repayments. Write down your trigger, such as needing confirmation by the date before a deposit becomes due. Use Chapter 3 to compare the funding options available to you.
8. Bring the sources and uses into Startup Builder
A sources-and-uses schedule is a short record of where the money will come from and what it will pay for. Uses are what you expect to spend, such as the amounts and dates for setup and early operating payments. Sources are the amounts expected from the owner or other funders, their receipt dates and their conditions. Use the cash forecast to show customer receipts and compare the full timing of money in and out. A list of sources and uses can show how you intend to fund startup work. The forecast shows when the account would need the money.
Figure 11. Compare the planned payments with the availability of funds.
Open Stage 7 · Financial Planning from the Classic journey. Use Startup costs to record what you need to spend to start. Use Cost forecasts to show the costs you expect to continue. In your Cash-flow forecast, match the dates of payments and receipts to the plan. Use Funding needs to summarise the gap, the first date it matters, and which sources or changes are being considered. If the workspace view covers a shorter period, keep the 36-month schedule and its evidence in your working file and bring the findings into Stage 7. Open Startup Builder
Give important legal or setup dependencies a date in Stage 8 · Legal & Operations, especially if those checks can affect when you are able to sell or deliver. In Stage 9 · Business Plan Finalization, connect the major commitments and financial decisions to a three-year timeline. When you move a milestone, check which costs, customer receipts and cash balances are affected.
Chapter_02_Section_08_Where_It_Goes.webp518 KB
9. Do the first check today
Take the next few commitments from your own idea and put them on a dated list. Keep the number of entries small enough to check the details in one sitting. Start with the payments that would affect when you can launch and the receipts that would help cover them. Identify the first date you want to review.
Figure 12. Review the evidence before you commit to a payment.
Choose the first commitment. Write what you would pay for and when the decision needs to be made.
Check the evidence. Write which quote, document or assumption supports the payment amount and date. Add any instalments without repeating what was paid before.
Read the balance. Estimate the available cash after the payment and compare it with your target. Test it with a delay to one important receipt or funding payment.
Write the response. If there’s a gap, record when it first appears, how large it could get, who will act and what must be confirmed before committing. If this part of the plan stays above the target, set the date on which you’ll check it again.
First Check
Bring that short answer to the next chapter. It’s easier to compare financing options when you already know what needs to be paid, how much cash you need, and the deadline for having it available.
Check your understanding
A quoted payment is due two months before launch. Where does it belong? Give it the payment date in the cash forecast, even if the item is used after trading starts.
A refundable deposit has been agreed. How should it be shown? Show the cash going out on its date. Add a later receipt when the expected release date and conditions support it.
Why can a positive year-end cash balance still leave a funding gap? Bills and receipts fall on different dates. You can run short before the money that produces the positive year-end balance arrives.
How can one later-year quarter need a monthly breakdown? A major payment may fall at the start of that quarter and an important receipt may arrive at the end. A monthly or dated view shows whether you can cover the payment when it is due.
Two videos to watch
Estimating Start-Up Costs for Your UK Business, EasyStepUK. Look for expenses you may have overlooked and make a list of three costs you can verify with a written quote. Watch the startup costs video
Cash Flow Forecasting Explained, Two Teachers. Follow the opening balance, receipts, payments and closing balance in a worked forecast. Pause after the first period and calculate the closing balance yourself. The British Business Bank recommends this explainer in its forecast guide. Watch the cash-flow video
Check whether your startup idea can pay its bills, meet the requirements for trading and move forward. Build a one-page decision using a rolling three-year plan with a more detailed first year.
Compare funding options using the amount you need, the date you need it and what you’ll owe or share afterward. Test your choice in a rolling three-year plan and decide what to do if the money arrives late.